- Samsung Evo 860 500gb Mac Software Installation Windows 10
- Samsung 860 Evo 500gb Review
- Samsung Evo 860 Migration Software
As is known to all, Samsung SSD enjoys high popularity in the industry. It develops 470 series, 750 series, 830 series, 850 series, 860 series, 950 series, 960 series and 970 series SSD with various capacities, from 120 GB to 4 TB. Among these products, Samsung 850 EVO and 860 EVO are chosen by most people due to its high performance, useful features and affordable prices. Especially for Samsung 860 EVO, it is tested to have the best performance which is balanced and stable according to 5 Common SATA 3 SSDs Test Performance.
SAMSUNG 860 EVO Series 2.5' 500GB SATA III V-NAND 3-bit MLC Internal Solid State Drive (SSD) MZ-76E500B/AM. Max Sequential Read: Up to 550 MBps Max Sequential Write: Up to 520 MBps. Jul 22, 2019 I have the same problem - I can't install windows 10 on my SSD (samsung 860 evo 250GB). I've tried so many things now to get it working, but after use the media creation tool (which works fine) - when it restarts it either goes directly to my BIOS or blue screen with 'error: 0xc00000e'. Earlier I wrote about the problem I encountered with a 1TB 860 EVO in my 2011 MacBook Pro 15” that went away only after I swapped it for an Mx500. Well, later I installed another, 500GB 860 EVO in a 13” 2011 MacBook Pro. Though with half the capacity of the first one, this one has been working flawlessly for a few months now. Samsung SSD DC Toolkit is designed to work with Samsung SSD products including PM863, PM863a, SM863, SM863a, PM963 non-customized, 860 DCT, 883 DCT, 983 DCT, 983 DCT M.2, and 983 ZET. This software is not compatible with other manufacturers' SSDs.
Most people are looking for a tutorial –how to install/add the Samsung SSD tutorial on desktop computer and laptop. No matter which Windows system they are using, Windows 10, Windows 8, or Windows 7, Windows XP, here in this article, we will illustrate how to finish Samsung SSD installation without reinstalling Windows system in the example of Samsung 860 EVO.
Step 1: Make Your Samsung 860 EVO SSD Connected with Your Computer
Feb 01, 2018 Is there any reason a new 500GB Samsung 860 EVO would be incompatible as a replacement internal HD on a MacBook Pro (13-inch, Mid 2012)? The Samsung site says it should be compatible with SATA 3 and 1.5 Gb/s interfaces. I have installed various versions of OS X using various methods on the drive.
For the desktop computer users, you can open the computer case, connect the new SSD with SATA cable and power line. Then, go to the computer disk management to initialize the SSD. For laptop users, they need to utilize the USB-to- SATA adapter to connect the SSD as the external drive and then go to initialize the SSD. In the end, you can add new volumes to the SSD.
Step 2: Do the Windows System Migration with Useful tools
Now it comes to the data migration from the old hard drive to Samsung 860 EVO SSD. According to your SSD capacity—250 GB, 500GB, 1TB, or 2TB, you can choose to move all the OS and data from your existing storage device to new Samsung SSD with Samsung Data Migration Software or migrate only Windows OS and certain partitions to the SSD and make it as the bootable drive. It all depends on what you want and whether your computer supports to add new SSD and keep HDD or not.
- Way 1: Use Samsung Data Migration Software for Consumer to Do the Data Migration
- Way 2: Use iSunshare Windows Cloning Software to Clone Windows OS
Way 1: Use Samsung Data Migration Software for Consumer to Do the Data Migration
1. Download and install this software from Samsung official website.
2. Launch this program and click Start to continue.
3. Get the Warning box to back up the data in Samsung SSD and you need to click Yes to start cloning.
4.On the Start Cloning interface, you will view the progress bar to check the process.
5. Get the successful prompt and you can start the computer from Samsung SSD.
2. Launch this program and click Start to continue.
3. Get the Warning box to back up the data in Samsung SSD and you need to click Yes to start cloning.
4.On the Start Cloning interface, you will view the progress bar to check the process.
5. Get the successful prompt and you can start the computer from Samsung SSD.
Samsung Evo 860 500gb Mac Software Installation Windows 10
If you fail to get 100% clone with this software and cannot boot the computer from Samsung SSD successfully, you can try Way 2.
Samsung 860 Evo 500gb Review
Way 2: Use iSunshare Windows Cloning Software to Clone Windows OS
iSunshare CloneGo is the reliable Windows cloning software which can help you to clone original hard drive data to Samsung SSD. You can clone only the Windows OS to Samsung SSD or clone whole disk data to the Samsung SSD if your SSD has enough space.
Option 1: Clone only Windows OS to Samsung SSD
1. Download and install this Windows cloning software from iSunshare official website.
2. Open the program and you will find all partitions are listed on the Copy interface.
3. Set your original hard drive Windows system partition as the source target and select a volume from your Samsung SSD to save the system data.
4. Tick the option “Set the target partition as boot disk”.
5. Click the Start button. And the cloning process runs and the data are copying to Samsung SSD.
6. Get the successful clone prompt. And you can restart the computer and make it boot from the SSD to have a further check.
Option 2: Clone Entire Disk Data to Samsung 860 EVO SSD without Reinstalling Windows
1. Launch iSunshare CloneGo and click Disk Clone option.
2. Set the source disk—the disk your Windows OS lays.
3. Set the target disk — the Samsung EVO SSD.
4. If your original hard drive stores a great number of data, it will take much more time to finish the data migration. You can tick the option “After Finished” and select “Shutdown”.
5. Click the Start button and leave the program runs automatically. After the cloning ends, your computer is set to shutdown.
Step 3: Install Samsung 860 EVO SSD into Computer
Now that the data has been cloned to Samsung 860 EVO SSD, you can replace the old hard drive with it on your laptop. Of course, the first thing you need to do is close the computer. If you have connected the SSD as the internal hard drive on desktop computers, you can ignore this step. Tutorials for reference:
1. How to Install SSD on Desktop Computer
2. How to Install SSD on Laptop
2. How to Install SSD on Laptop
You complete the Samsung 860 EVO installation without reinstalling Windows system in the end. Do you grasp all the details? Why not have a try now! When you want to add SSD to the laptop without removing the HDD, you can easily do that with the above tutorial.
Related Articles:
FAQs
Here you’ll find frequently asked questions and solutions for your computing life upgraded with Samsung V-NAND SSD.
Can Samsung install SSD’s for consumers?
No, Samsung does not offer any type of SSD-installation service for customers.
Please refer to the install guide in the user manual. If you have difficulty installing your SSD, you may seek assistance at a local PC store or independent service center.What are the differences between the Desktop PC Installation Kit, the Laptop PC Installation Kit, and the Basic package?
Each package contains the same SSD but includes different accessories. Please refer to accessories list for each package design below.
- Desktop : Installation Guide, Warranty Statement Summary, USB to SATA cable, SATA Data cable, Screw, Bracket, CD(Data Migration Software, Magician Software, Warranty statement, One-Stop Install Navigator)
- Laptop : Installation Guide, Warranty Statement Summary, USB 3.0 to SATA to cable, Drive Spacer, CD(Data Migration Software, Magician Software, Warranty statement, One-Stop Install Navigator)
- Basic : Installation Guide, Warranty Statement Summary, CD(Data Migration Software, Magician Software, Warranty statement, One-Stop Install Navigator)Does my Samsung SSD support SATA 3Gb/s (SATA II) or SATA 1.5Gb/s (SATA I)?
Yes, Samsung SSDs are backward compatible with SATA 3Gb/s (SATA II). and SATA 1.5Gb/s (SATA I).
However, we do not recommend the usage in the condition of SATA 3Gb/s (SATA II) or SATA 1.5Gb/s (SATA I).
If you are seeking the maximum performance, you may want to consider upgrading the motherboard on your system.Which Operating Systems support Samsung SSDs?
All operating systems support Samsung SSDs, but not all operating systems are optimized to keep SSDs working at the peak performance.
Older operating systems, such as Windows XP and Windows Vista, do not support certain SSD maintenance features like TRIM.
Windows XP and Windows Vista users can use Samsung SSD Magician to manually schedule and run SSD maintenance.
Samsung SSD Magician is not currently supported via Mac OS X or Linux.How do I configure AHCI settings?
- The best way to enable AHCI is to go to BIOS and enable AHCI mode, and then install the operating system. Boot the system, enter BIOS setup, and change SATA settings from IDE to AHCI.
- Install the operating system.
When Windows is installed without enabling the AHCI mode in BIOS setup, an error may occur during the booting. Change the settings as shown below, or reinstall Windows.
- Go to Start>Run, and then enter 'regedit' in the Run window and press Enter to launch the Registry Editor.
- HKEY_LOCAL_MACHINE > SYSTEM > CurrentControlSet > services > msahci In this menu, you will see an item named Start. Double-click it to change it to '0'and then reboot.
- Enter BIOS setup, and change SATA settings from IDE to AHCI.
• ASUS Intel chipset : Main > Storage Configuration > Configure SATA as In this menu, select AHCI
• ASUS AMD chipset : Main > Storage Configuration > SATA Mode Select In this menu, change to AHCI Mode
• GIGABYTE Intel chipset : Integrated Peripherals > SATA RAID/AHCI Mode In this menu, select 'AHCI'
• GIGABYTE AMD chipset : Integrated Peripherals > OnChip SATA Type In this menu, select AHCI
• MSI Intel chipset/ AMD chipset : Integrated Peripherals > On-Chip ATA Devices > In RAID Mode, select AHCII have a SATA 3Gb/s (SATA II) motherboard. Should I buy an expansion card to add SATA 6GB/s (SATA III) support?
Samsung SSD's peak performance is hardly reached with SATA III (6GB/s) expansion cards. We do not recommend the use of such expansion cards. If you are want the maximum performance, consider an upgrade to a motherboard which support SATA III.What is firmware? How do I update it?
Firmware is a tiny software program stored in a semiconductor chip, such as a NAND chip.
It includes the software code and commands necessary for operating a device.
Firmware is designed to be updated via software updates so that manufacturers can improve performance and quality of the hardware.
Samsung SSD's Firmware can be updated via the Samsung SSD Magician software.
If you do not have the software CD came with the SSD, Magician can be downloaded from the Samsung website at
www.samsung.com/ssd or www.samsung.com/samsungssd.How do I update the Firmware Update?
Samsung occasionally provides new firmware in order to improve SSD performance, compatibility, and user experience.
Firmware update is recommended whenever a new version is released. SSD drive and Model number are shown.
If you encounter any problem with the Live firmware Update feature and your SSD is 470 series, you can perform DOS-based firmware update utility via bootable CD/DVD/USB.
1. Firmware Update using Magician: http://www.samsung.com/samsungssd
• When a new firmware is available for Samsung SSD on your system, a message 'New Version of Firmware Detected (Version Number)' appears next to the Update button on the Firmware Update screen.
2. DOS Firmware update Utility: http://www.samsung.com/samsungssd
[Caution]
- Before updating the firmware, please back up your data and close all running applications (except Magician)
- Before updating the firmware, please check whether your SSD's firmware is the latest version or not
• Magician home -> Firmware Update
• Samsung website : http://www.samsung.com/samsungssd
[Caution]
- Please do not power off during firmware update
- Firmware Update cannot be performed on a RAPID Enabled SSD
- PC reboot is requiredDo I have to update Firmware if it’s available?
Samsung recommends the users to upgrade to the latest version of firmware. Please update your firmware when a new version is available.How do I update the firmware on my SSD?
The easiest way to update the firmware on your SSD is to use the Magician software.
This software is only available for Windows, not available on Linux or Mac OS X.
You may also create a bootable USB drive or a CD with a Firmware ISO file available at http://www.samsung.com/samsungssd.How do I update firmware in DOS mode?
[Caution]
The following steps assume that all necessary files are present on the USB/CD/DVD disk. Please refer to the Make Bootable USB or Burn Bootable CD/DVD section for more information.
1. Configure the USB/CD/DVD drive as the primary boot device in the BIOS.
NOTE: Enable AHCI/IDE/ATA mode on your system
2. Restart the computer in DOS mode with the bootable USB/CD/DVD.
3. The Firmware Update utility is launched automatically.
4. After reading the disclaimer, Press [Y] to accept the terms.
5. The application scans for any connected SSDs. A list of detected disk(s) is displayed.
6. Press [Y] to confirm and proceed with the firmware update process.
CAUTION: Do not disturb the system until the firmware update is complete.
7. The disk is updated to the latest firmware.
[Caution]
- Before updating the firmware, please back up your data and close all running applications (except Magician).
- Before updating the firmware, please check whether your SSD's firmware is the latest version or not.
• Magician home -> Firmware Update
• Samsung website : http://www.samsung.com/samsungssd
- Please do not power off during firmware update.
- Firmware Update cannot be performed on a RAPID Enabled SSD.
- Please connect the SSD to the mainboard's SATA port 0.
- PC reboot is required.How do I make a Bootable USB Disk?
1. Insert a USB flash drive into a USB port on your computer. Please wait for the computer to recognize the device
2. Run Magician and click the Browse button under the Secure Erase menu of Magician
3. Choose the attached USB Flash Disk
4. Click the Start button; a progress bar will appear to show the status of the bootable USB disk creation
5. Once completed, restart the computer and boot from the USB disk to initiate the Firmware Update process
6. Follow the steps in the DOS Firmware Utility sectionHow do I make a Bootable CD/DVD?
1. Insert a blank CD/DVD into an optical drive; please wait for the System to recognize the inserted disk
2. Click the Browse button on the Secure Erase screen of Magician
3. Choose the attached CD/DVD Drive
4. Click the Start button; a progress bar will appear to show the status of the bootable USB disk creation
5. Once completed, restart the computer and boot from the USB disk to initiate the Firmware Update process
6. Follow the steps in the DOS Firmware Utility sectionHow do I update the firmware on a Linux computer or a Macintosh?
If you use an x86-based Linux machine, you may load the firmware ISO file onto a bootable USB drive from a Windows-based computer.
If your Mac OS supports booting from USB, you might be able to upgrade your firmware this way as well.
You can download the firmware ISO file from http://www.samsung.com/ssd or http://www.samsung.com/samsungssd.Are there other ways to upgrade the SSD firmware?
The only way to update your firmware is to download and run the SSD Magician Tool.
Once you have this tool, there are several ways to perform the update: via CD, via bootable USB drive, and via Magician itself.
Additional information about this application can be found in this FAQ list.How can I find out if my Samsung SSD has the latest firmware?
Run the Magician software and choose “Firmware Update” under the navigation menu.
If the program suggests that you do not need to update the firmware, you have the latest firmware.
Magician software is available for Windows only, not for Linux or Mac OS X.Does installing new firmware to an existing SSD erase the data stored on the drive?
Updating firmware should not affect the data stored on your drive.
However, it is highly recommended to back up your data to another drive before updating firmware to mitigate any potential risk.Can I downgrade the firmware from the latest version to an older version?
No. Once you upgrade the firmware, you cannot go back to an older version.
It should not be necessary to go back to an older firmware because we fully test every firmware release to ensure that it is optimized for performance, reliability and compatibility.Can I update firmware using a USB2SATA cable?
Magician currently does not support the USB to SATA interface.
Please update by connecting the disk to a SATA cable on a desktop PC or installing the disk in the internal drive bay of a laptop.Do I need special device drivers for my Samsung SSD?
No. SSDs are drop-in replacements for standard HDDs.Where do I find the device drivers for my Samsung SSD?
There is no device driver for Samsung SSD.
All Samsung SSDs work as a plug-and-play device; your system should recognize the SSD immediately after connecting the device cable.Do I need a special SATA 6Gb/s (SATA III) cable for my Samsung SSD?
Not really. All SATA cables are compatible with SATA 6Gb/s (SATA III).
While some vendors claim to offer special cables, they do not affect the performance.How do I install my SSD in my computer?
Refer to the install guide in the user manual or one stop install navigator.
http://www.samsung.com/samsungssdHow do you install an SSD as a boot drive?
If you are installing the SSD into a new system, you can ensure that your SSD is the boot drive by making sure that it is the only drive plugged into the computer when you install the operating system.How do I install my 2.5” SSD into a desktop computer?
Simply unplug the power cable and SATA interface connector from your 3.5 inch hard disk drive inside the chassis of your PC.
Connect both cables to your 2.5 inch SSD. Place the 2.5 inch SSD gently in a location inside the chassis where it will not bounce around or get damaged.
For greater structural integrity, you can affix a 3.5” adapter bracket to your 2.5 inch SSD. These brackets are included with the Desktop Installation Kit.
If you do not have a 3.5” bracket, you can purchase it online or at most local IT stores.What is the best RAID configuration?
There is no 'best' RAID configuration.
Consumers who choose to set up a RAID configuration should choose the option best-suited to their particular usage scenario.
Each RAID configuration has specific advantages and disadvantages.
Those looking for the highest possible performance may configure at least two SSDs in RAID 0 mode.
Samsung Evo 860 Migration Software
Here you can find answers to questions about Portable SSD T5.